devkitPro

After the previous send here we receive two packets in a row. While (almost?) all the received packets have protocol set to B0024C8, here the first packet has protocol set to B00241C, and the second one again B0024C8. When the second packet gets to sgIP_UDP_ReceivePacket(), the following line hangs ...

Thanks for the source! JSYK, compiled perfectly under Windows as well... Here's further information what's going on: There are probably coming from Wifi_Update() in wifi_arm9.c, after reading a packet from the RX buffer. The RX buffer is checked in a loop, and obviously there's at least two packets ...

One thing I did notice when I did rebuild with dswifi9d and stuck dbgprint in there is that I get this just before the hang: R:001AE90B008B 00224391F6B6 0800R:001AE90B008B 00224391F6B6 0800 There are probably coming from Wifi_Update() in wifi_arm9.c, after reading a packet from the RX buffer. The ...

You should definitely keep the defaultExceptionHandler() for helping find the problems in your code. This enables the exception screen that shows the register values and current addresses where things went wrong. You can then trace back these addresses on your development computer with following ...

Perhaps this is a glOrtho() / value overflow related issue? See here for more information. I haven't used 3d modes on DS for a while, but last time I checked (several libnds versions ago) drawing 2d quads in 3d mode worked also when initializing simply with: glInit(); glEnable(GL_TEXTURE_2D ...

This actually brings up something that I'm not sure how to handle at all. For a system where nitroFS isn't read through libfat then this sort of thing will fail anyway - emulators and slot2 cards for the most part. Where nitrofs *is* read through libfat then the ideal situation would be for fat ...

Nevermind, the code posted above actually works as it should. The problem was a result of NitroFS not receiving the argv values as intended.

I'm bit puzzled about how to get libfat and nitrofs working at the same time. Either I get fat or nitro initialized and working, but can't use one after another. Any pointers on this would be appreciated - perhaps adding also an example to examples/nds/filesystem ? The following code was tested with ...

Well, I pulled buildscripts from the devkitPro CVS ... looking at the logs, it seems you have stopped updating CVS at the end of 2008? devkitPro has been using svn for quite some time: http://sourceforge.net/scm/?type=svn&group_id=114505 To confirm this is an issue with your DS Lite, and not in ...

1) mmutil supports wavs with loops in them, if you don't have a program that can set the loop point in a wav file (seems to be a rare feature) then you can put the wave file in a module instead and set the loop there (name/DOS filename of the sample in the module must be prefixed with # to export a ...