Page 1 of 1
Is there any schemtics for flash cart ?
Posted: Mon Aug 03, 2009 11:48 am
by hl1itj
Is anybody can help me to build a selfboot slot-1 flash (rom) cart for NDSL ?
Schematics (with verilog/VHDL code if FPGA used) are very welcome.
I want to make something like Dserial-edge with sram, and some more IO devices.
Minsuk
Re: Is there any schemtics for flash cart ?
Posted: Fri Aug 14, 2009 4:39 pm
by Rezak
I looking to DS serial long time, but not understand one thing.
Do I need upload nds files from flash adapters (SuperCard one, M3 Real)
for runing DsRobot DSMidi interfaces or not?
Ds Serial is very cool project, but absolutely impossible to understand
how it works.
Looks like sheme is very simple
http://www.natrium42.com/w/images/d/d3/ ... ematic.png
http://www.natrium42.com/wiki/Image:Dse ... c-slot.png
So if I connect controller to 5pins of DS Slot1. how I will execute nds file?
Re: Is there any schemtics for flash cart ?
Posted: Sat Aug 15, 2009 5:32 am
by Rezak
DS Serial is selfboot card or not?
Re: Is there any schemtics for flash cart ?
Posted: Sat Aug 15, 2009 10:15 am
by hl1itj
Dserial (Dserial2) doesn't have any flash memory to boot.
The schematics even for the self-bootable DserialEdge on
http://www.natrium42.com/ does not cover anything about the flash (miniSD) memory part.
Re: Is there any schemtics for flash cart ?
Posted: Sun Aug 29, 2010 9:31 pm
by ShotgunNinja
This might help:
It's a mirror of Natrium42's PassMe VHDL file, with the original being on the (currently down?) darkfader.net.
http://dslinux.gits.kiev.ua/trunk/toolc ... passme.vhd
