devkitPro

Hi Community,

i'm searching for some information about accessing the ports in the Slot2 with software running from a Slot1-Device. I want to build a controller and/or sensor for the ZigBee homeautomation system.

Any help would be great.

Thanks in advance,
therob

Here's a couple pages with info on the slot-2 interface:
http://nocash.emubase.de/gbatek.htm#auxgbagamepakbus
http://www.reinerziegler.de/GBA/gba.htm ... does%20the

Here's a premade device you can use to interface with electronics, self-contained in slot-1:
http://www.electrobee.com/dserial-edge-p-45.html